Bulletin 129 May 2018 Becoming Familiar with Fire Emergency Procedures
- Posted at: September 25, 2021 03:02:26

Whether one owns or manages a building, the responsibility of identifying all potential risks for fires is a high priority. By far, the best line of defense to reduce injuries from fires is to prevent the fires from occurring in the first place. This is followed by implementation of an approved fire safety plan (FSP) to ensure the building occupants gain confidence and become familiar with emergency procedures. It is to be noted that although a FSP bears the stamp of acceptance and/or letter indicating the FSP meets the requirements, a building manager’s responsibility is far from over when it comes to implementation. Regardless of whether the building has a newly-approved FSP or one which is already in place, building managers are responsible for ensuring that all applicable requirements are followed at all times.

Ensuring that the contents of a fire safety plan are up to date is an absolute must. Fire code requires that each FSP is reviewed at intervals not greater than twelve months. This undoubtedly may seem like a huge task as the FSP can easily run over sixty pages, and a building manager can be overwhelmed with the update process. It is even more of a challenge since one of the aims is to update only the applicable text as required. Being in possession of an electronic copy of the FSP certainly is of benefit as it allows the building manager to make revisions and print pages on demand. Simple changes may include updating the building’s emergency contact information, identifying those individuals with special needs, and other minor revisions. Should the electronic version not be available, a hardcopy is normally found within the FSP box located by the building main entrance. Unfortunately, if an electronic version of the FSP is not available, re-typing portions of the document may be necessary for insertion into the FSP. For more extensive alterations, such as properly describing fire alarm and sprinkler system retrofits, structural add-ons, or a building ownership change, the developer of the original FSP may be contacted. Their comprehensive audit would include verifying the placement of the fire and life safety equipment is accurately indicated on the floor layout drawings, along with confirming the fire panel’s sequence of operation, elevator homing functions and all means of egress. A re-submission to the City Fire Services should be considered.

This article was contributed by Firepoint Inc, serving the GTA since 1997, developing fire department approved fire safety plans for newly constructed and existing buildings. Although every effort is made to ensure the accuracy, currency and completeness of the information, the bulletin publishers and authors do not guarantee, warrant, represent or undertake that the information provided is correct, accurate or current and shall not be liable for any loss, claim, or demand arising directly or indirectly from any use or reliance upon the bulletin information. Bulletin reproduction in whole or in part is prohibited without the written consent of Firepoint Inc. Copyright 2021 – All Rights Reserved. See www.firepoint.ca or call 905-874-9400.

error: Content is protected !!